Products

Home > ProductsTEHP Series is the Bismuth Telluride based thermoelectric modules for converting heat into electricity. It is designed to optimize its performance for around 250-300C heat source

The power module is designed and manufactured by our patented technology for converting heat source directly into electricity. The module is Bi-Te based thermoelectric module that can work at the temperature of as high as 330 °C (626 ℉) heat source continuously, and up to 400°C(752℉) intermittently.  The thermoelectric module will generate DC electricity as long as there is a temperature difference across the module. The more power will be generated when the temperature difference across the module becomes larger, and the efficiency of converting heat energy into electricity will increase therefore. The module is stuck with the high thermal conductivity graphite sheet on its both sides of the ceramic plates to provide low contact thermal resistance, hence you do not need to apply thermal grease or other heat transfer compound when you install the module. The graphite sheet can work well in extremely high temperature. 

High Performance TEHP Series Thermoelectric Power Module

Part Number

The following specification are based on that tthe hot side temperature is at 300 ℃ and cold side at 30 ℃.

TEHP1-

1263-1.5

  • Size: 30 mm x 30 mm
  • Open circuit voltage: 8.2 volts
  • Matched load resistance:2.96 ohms
  • Matched load output voltage: 4.1 volts
  • Matched load output current: 1.3 amperes
  • Matched load output power: 5.33 watts
  • Heat flow through the module: about 90 watts
  • Heat flux: about 10 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

12635-1.2

  • Size: 35 mm x 35 mm
  • Open circuit voltage: 8.3 volts
  • Matched load resistance:2.2 ohms
  • Matched load output voltage: 4.2 volts
  • Matched load output current: 1.86 amperes
  • Matched load output power: 7.8 watts
  • Heat flow through the module: about 132 watts
  • Heat flux: about 10.8 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

1264-0.8

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 8 volts
  • Matched load output resistance:1.59 ohms
  • Matched load output voltage: 4 volts
  • Matched load output current: 2.4 amperes
  • Matched load output power: 9.8 watts
  • Heat flow through the module: about 166 watts
  • Heat flux: about 10.4 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

12656-0.3

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 8.4 volts
  • Matched load output resistance: 0.9 ohms
  • Matched load output voltage: 4.2 volts
  • Matched load output current: 4.6 amperes
  • Matched load output power: 19.3 watts
  • Heat flow through the module: about 306 watts
  • Heat flux: about 9.8 watts/cm2
downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

12656-0.55

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 8.6 volts
  • Matched load output resistance: 1.12ohms
  • Matched load output voltage: 4.3 volts
  • Matched load output current: 3.84 amperes
  • Matched load output power: 16.5 watts
  • Heat flow through the module: about 246 watts
  • Heat flux: about 7.8 watts/cm2
 downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

1994-1.5

  • Size: 40 mm x 40 mm
  • Open circuit voltage: 12.6 volts
  • Matched load output resistance: 3.6 ohms
  • Matched load output voltage: 6.3 volts
  • Matched load output current: 1.75 amperes
  • Matched load output power: 11.0 watts
  • Heat flow through the module: about 192 watts
  • Heat flux: about 12.0 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

TEHP1-

24156-1.2

  • Size: 56 mm x 56 mm
  • Open circuit voltage: 14.4 volts
  • Matched load output resistance: 2.4 ohms
  • Matched load output voltage: 7.2 volts
  • Matched load output current: 3.0 amperes
  • Matched load output power: 21.6 watts
  • Heat flow through the module: about 365 watts
  • Heat flux: about 13.2 watts/cm2

downloadSpecification Sheet Download

downloadPower Module Installation Notes

 

If you did not find thermoelectric module that meets your requirements, we are ready to design the one at your request.

 

福建十一选五怎么玩 广西11选5任八倍投计划 内蒙古11选5走势图5 熊猫麻将官方版下载安装 北京pk10最准1期计划 AG欧洲厅怎么注册_welcome 国色天香刮刮乐图片 mg电子游戏摆脱心得 陕西快乐十分钟开奖结果 幸运飞艇最新群二维码 新疆时时彩预测分析 福彩3d和值走势图带连线 经典街机电玩捕鱼 31选7走势图开奖结果 辽宁快乐12分析软件 2012麻将游戏单机版 11选5技巧不得不学的稳赚秘籍